1)Nokia Secret Codes
Nokia 31xx
____________
Firmware version
*#0000# or *#3110#
IMEI Code
*# 06 #
Restores Factory Settings
*#7780#
Warranty Codes
*#92702689# (= *#war0anty#)
Just scroll down through the information. If entering the above code requires a
further warranty code try entering the following:
6232 (OK) : Month and year of manufacture
7332 (OK) : Last repair date
7832 (OK) : Purchase date (if previously set)
9268 (OK) : Serial number
37832 (OK) : Set purchase date (this can only be done once)
87267 (OK) : Confirm transfer
Nokia 5110
_____________
IMEI Number *#06#
For checking the IMEI (International Mobile Equipment Identity).
---------------------------------------------------------
Security Code 12345
Default security code is 12345. If you forgot your security code, there s so many program on the net which allowed you to know the security code likes Security ID Generator, Nokia IMEI Changer, etc.
update:
Security ID Generator (SID.EXE) and IMEI Generator (NOKIAIMEI.EXE) doesn t works with Nokia 5110
Resetting Security Code
If you accidentally lock the phone or forgot the security code, the best thing to do is check it with your local Nokia dealer. For advanced user, you can use WinTesla, PCLocals or LogoManager program to read the security code or resetting the code (You will need an FBUS/MBUS (or compatible) cable to do this.
---------------------------------------------------------
Software Version *#0000#
For checking the phones software (SW) - called firmware revision information.
e.q : Version V. 4.51 (26-03-98) will display
V 04.51
26-03-98
NSE-1
first line:
The Software Version (my guess is that this software has been used in previously Nokia-phones, what do you say?!).
second line:
The Date of the SW release.
third line:
NHE-8 has something to do with the type of phone you are dealing with. Is it GSM 900 (standard), GSM 1800 (DCS1800) or GSM 1900 (PCS1900)?
Nokia 2110, 3110, 8110(i) are all NHE types. The only thing that vary is the code after NHE- ("8").
NHE = GSM 900, NHK =GSM 1800 - The number in the end = the model (2110i = 4 etc.)
The 5110 and 6110 is called NSE-1 and NSE-3...this may be because it supports EFR (?)
update:
Newest Software Version was V5.22 (xx-xx-99)
V 05.22
01-07-99
NSE-1
If your software version is V4.00, upgrade your software version to latest version. V4.00 contains bugs that sometimes will show message,
"SIM Card Not Ready" even the card is already inside the phone.
---------------------------------------------------------
Software Update
The only thing to do (for you and me) is for us to go to the nearest Nokia dealer and make him do it for you. Just remember that it is supposed to be free (a receipt is required) so don t let him tell you anything else!
---------------------------------------------------------
SIM clock *#746025625# [*#sim0clock#]
to check if the Sim-Clock can be Stopped. This option is depen on your service provider network. (Sim-clock-stop is a kind of standby mode which will save battery time)
update:
This code doesn t work on phone with software version 4.59.
---------------------------------------------------------
Waranty Code *#92702689# [*#war0anty#]
Menu:
Displays Serial Number.
Displays the Month and Year of Manufacture (0698)
Displays (if there) the date where the phone was purchased (MMYY) you can here set the Purchasing Date
(Warning: You can only do this once - so be careful what you write)
Displays the date of the last repairment - if found (0000)
The next screen has Transfer User Data? (the same option as the 8110)
To exit turn the phone off and then back on.
---------------------------------------------------------
SP Lock The Service provider (SP) lock
Is used to lock the cell phone to the SP s SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it!
The cell phone will however accept another SIM card from the same operator.
All Nokia phones (2110 and newer) have four different SIM locks which can be used to lock the phone for up to 4 different providers. But most phones with restriction only have one lock activated. ( lock 1)
The main code used in Nokia phones is:
#pw+(master code)+Y#
This code is able to check, activate or remove Sim card restriction (SP-lock).
Use the * key to get the p, + and w chars.
Y has to be 1,2,3 or 4 - depending of what lock you what to deal with.
#pw+1234567890+1# for Provider-Lock status
#pw+1234567890+2# for Network-Lock status
#pw+1234567890+3# for Provider(???)-Lock status
#pw+1234567890+4# for SimCard-Lock status
(master code) is a 10 digit code, based on the phones IMEI number.
(I can NOT give you the master code SO DON T ASK ME FOR IT! )
Please click here to learn more about how to obtain mastercode and find out the lock status of your phone
eq. To remove restriction on lock 1 type following code:
#pw+(master code)+1#
If you just want to check your phone use 10 random numbers Eg. 1234567890 as the (master code)
eq. To check if phone if restricted on lock 1 type the following code:
#pw+1234567890+1#
Please NOTE that these codes could be used with care!
A user told me that it s only possible to type in about 3 different codes on each lock! Then something bad will happen ..therefore be careful!
---------------------------------------------------------
How can I check what locks have my phone closed?
There is 2 methods:
Use winlock to see the state of the locks, pressing Read Info.The Counter is the number of times that you have tried unlock your phone using an incorrect master code.
You can check it entering an imaginary mastercode on your phone but, it s not recommended because if you try enter a code 5 times your phone will not work anymore. By example, if you press at your phone #pw+1234567890+2# (note that # , p , w and + characters must be selected from * key) and your phone give you Code Error then your phone have lock 2 closed, if you get the message SIM Restriction Off your phone have lock 2 opened.
Look the table above to see how can check all locks:
Lock number Description Sequence to Check
1 Provider Lock #pw+1234567890+1#
2 Network-Lock #pw+1234567890+2#
3 Another Provider Lock #pw+1234567890+3#
4 SIM Card Lock #pw+1234567890+4#
---------------------------------------------------------
Unlock SP-Lock
Here is a way to Unlock your phone which is Service Provider locked, without to know SPLock code. With a Nokia 16xx/21xx/31xx/51xx/81xx that are SIMlocked to one privider you can bypass the SP lock like this:
First of all, PIN CODE MUST BE ON, then press:
C
C and hold until it clears display
* and hold until start to blink
* and hold until start to blink
04***your pin>#
Each time you turn your phone OFF it resets the lock, so this need to be done each time you ll turn your phone ON
The phone now says: PIN CODE CHANGED (or ACCEPTED)
and the SIM card is accepted until you restart the phone again.
NOTE: On vesion 5.04 Nokia has removed this option !
update:
There s another Nokia service provider lock generator for DOS (somehere on the net) called 5161un.zip (for Nokia 51xx-61xx models) This program uses the #pw+(master code)+1# code to unlock the phone. With this software you need to have a access to the EEPRom.. Sad
---------------------------------------------------------Bypass the SP-lock
With a Nokia 16xx/21xx/31xx/51xx/81xx that are SIM locked to one privider you can bypass the SP lock like this:
Insert sim card of diferent provider.
Turn on the phone and press the UP VOLUME key for 3 sec. then release it and the phone says PIN CODE ?
Press the "C" key.
Then Press * and wait until it desapear and apear again, then press * one more time and 04*PIN*PIN*PIN#
The phone now says: PIN CODE CHANGED (or ACCEPTED)
and the SIM card is accepted until you restart the phone again.
update:
On version 5.04 Nokia has removed this option !
---------------------------------------------------------
How to open lock 1 and 4?
You will need Winlock software and MBUS cable to do this. Winlock is a Nokia service program that you can use to open lock 1 and 4, really you are closing locks when you do that, but when you write ????? at MCC+MNC and MSIN text box, the phone don t understand it and consider that it s open.
That trick only works for lock 1 and 4, but not for lock 2 and 3. If you did not know your lock type, please read our miscellaneous tips page first. or read at above section in this page.
Install winlock 1.10
Connect your MBUS nokia data cable
Run Winlock
Push Read Phone, if you have Lock 2 or Lock 3 closed you can not open your phone, but you can try change Lock 2.
Select State Close in Lock 1 and Lock 4, fill out MCC+MNC and MSIN text boxes with ??????? and Push Close Locks.
Now you can use any operator card in your phone. If you get any error when you do that do the following steps:
Select State Automatic in Lock 1 and Lock 4 and change type to User in Lock 1 and Lock 4, fill out MCC+MNC and MSIN text boxes with ?????????? and Push Close Locks.
Select State Automatic in Lock 1 and Lock 4 and change type to Factory in Lock 1 and Lock 4, fill out MCC+MNC and MSIN text boxes with ?????????? and Push Close Locks.
If you continue getting errors you must turn off your phone and reset computer and try again.
---------------------------------------------------------
How to open lock 2?
When operators companies close lock2 you can only use the contract or prepaid card for this operator, but you can use another operator company prepaid card if you know what GID1 must write.
Install Winlock
Run Winlock
Configure Winlock. Select menu Winlock->Defaults and change GID byte count to 2.
Push Read Phone, and write down GID1 info that appear in lock 2.
Insert the prepaid card from a different operator company.
We must find out a the GID1 info adecuate for our new prepaid or contract card, take a look at our GID1 list and check if your operator and SIM card type is included, if not try to get a phone that have lock 2 closed and have the SIM card type that you want to use in your phone, and read GID1 info with winlock. You can try to write the most used GID1 codes like 0000,10FF,01FF, or FFFF, etc.
Change Lock 2 Type from User To Factory or from Factory to User.
Push Close Locks
Your phone will be reset every time you push Close Locks, if your card is not acepted the GID1 is not correct, repeat from step 4 until you find the correct GID1.
If you get error you must turn off your phone and reset computer and try again.
If you want your phone accept your original prepaid card write in GID1 the code you read at step 2 and close locks.
Exist a GID1 list?
In addition to the official way to open locks that Nokia service centers use with TDB4 or TDF-4(for WinTesla) security boxes, there is two secrets methods:
Opening the phone and adding a chip inside phone motherboard. But you will loose any warranty of your phone.
Using a special software with a MBUS Nokia cable. I don t have this software. Please don t bother me asking me about that. The only thing i know about that is that a friend is removing lock 2 using a special software. He don t make this for money, only for fun.
--------------------------------------------------------
Main Code #pw+(master code)+Y#
This code is able to check, activate or remove Sim card restriction (SP-lock).
Use the * key to get the p, + and w chars.
Y has to be 1,2,3 or 4 - depending of what lock you what to deal with.
#pw+1234567890+1# for Provider-Lock status
#pw+1234567890+2# for Network-Lock status
#pw+1234567890+3# for Provider(???)-Lock status
#pw+1234567890+4# for SimCard-Lock status
(master code) is a 10 digit code, based on the phones IMEI number.
update:
I get report that told me the code didn t works for Optimus Card
---------------------------------------------------------
Enhanced Full Rate Codec (EFR)
Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more)
*3370# and EFR will be activated after a reboot of the phone ( consumes more power )
#3370#
and EFR will be switched off after a reboot of the phone.
---------------------------------------------------------
Half Rate Codec (HR)
Half Rate will give you bad sound quality, which gives the service provider the opportunity to have more calls on the network; and you might get a lower charge from them. (Will give you 30% longer talk-time)
*4720# Half Rate coded will be activated after a reboot of the phone ( better standby time )
#4720# Half Rate coded will be de-activated after a reboot of the phone
---------------------------------------------------------
Unblocking Code
Unblock PIN1 : **05*PUK*newPIN1*newPIN1#@
UnBlock PIN2 : **052*PUK2*newPIN2*newPIN2#@
---------------------------------------------------------
Hiding your phone number
Dial 141 then the number you want to call eg. 141#######
This should stop your number been sent to the caller. (*)
(*) This only works on UK phones, if anybody has tried this and works, please let me know.
---------------------------------------------------------
Unlocking PIN2 for software version
V 05.07
20.11.98
NSE-1
If your SimCard is locked by your SP, you can check it and if it is, you will get the "wrong code" message on the display (for use 1234567890)
If your SimCard is locked by your SP, you can t unlock PIN2 !
---------------------------------------------------------
Blocking phone number at Cantel AT&T
If you have one of those cantel at&t phones if you press #0000# you can block your number
at no extra charge.
---------------------------------------------------------
New Menu on Emergency Calls *3001#12345#
Brings a new menu that gives you access to the emergency calls ( 911 Etc. ). It will give you FREE calls! (only the ones you put in the emergency!! )
This option will depend on your GSM operator
---------------------------------------------------------
Your number in your display
Goto menu 3-7 Call cost settings.
Turn ON the Call costs limit 3-7-1. PIN2 code Required.
Put in the limit with the phone number.
eg. my phone # is 019 2184697
Enter the limit as 2184697
Goto menu 3-7-2 Show costs in. PIN2 code Required.
Select Currency.
Enter Unit price : 1
Enter Currency name as 019 (per my phone # eg. above)
Now the phone number 019 2184697 will remains on the 4th row of the display.
Secondly, if you press the # key, it prompt which line to be used; Line 1 or 2.
---------------------------------------------------------
Free Call Tip
The tips needs Net Monitor enabled. Be aware that the trick will remove Netmonitor in some sw versions like v4.73 and v5.04.
Launch the Net Monitor in your Nokia 51xx / 61xx
Execute the test number 497
Free calling for about 90 sec should now have been activated.
---------------------------------------------------------
Nokia 5110 PIN-Out
Pin-Outs: Bottom view, keyboard up, counting from the left
V V 1 2 3 4 5 6 V
(o) | | [= = = = = =] | |
7 8 9 10 11 12
1 - VIN CHARGER INPUT VOLTAGE 8.4V 0.8A
2 - CHRG CTRL CHARGER CONTROL PWM 32Khz
3 - XMIC MIC INPUT 60mV - 1V
4 - SGND SIGNAL GROUND
5 - XEAR EAR OUTPUT 80mV - 1V
6 - MBUS 9600 B/S
7 - FBUS_RX 9.6 - 230.4 KB/S
8 - FBUS_TX 9.6 - 230.4 KB/S
9 - L_GND CHARGER / LOGIC GND
Nokia 61xx
__________
Firmware version
*#0000# or *#61x0#
IMEI Code
* # 06 #
Warranty Codes
*#92702689# (= *#war0anty#)
Just scroll down through the information. If entering the above code requires a
further warranty code try entering the following:
6232 (OK) : Month and year of manufacture
7332 (OK) : Last repair date
7832 (OK) : Purchase date (if previously set)
9268 (OK) : Serial number
37832 (OK) : Set purchase date (this can only be done once)
87267 (OK) : Confirm transfer
Enhanced Full Rate (EFR) and Half Rate Mode (HFR)
*3370# to activate Enhanced Full Rate - Makes calls sound better, but
decreases the battery life by about 5%.(I recommend this one)
#3370# to deactivate Enhanced Full Rate
*4720# to activate Half Rate Mode - Drops call quality, but increases battery
life by about 30%.
#4720# to deactivate Half Rate Mode
Nokia 81xx
_____________
Show IMEI code
* # 06 #
Software Version
* # 8110 #
This code shows you software version, date of manufacture and hardware number of your phone.
Warranty Codes
*#92702689# (= *#war0anty#)
Just scroll down through the information. If entering the above code requires a
further warranty code try entering the following:
6232 (OK) : Month and year of manufacture
7332 (OK) : Last repair date
7832 (OK) : Purchase date (if previously set)
9268 (OK) : Serial number
37832 (OK) : Set purchase date (this can only be done once)
87267 (OK) : Confirm transfer
Sim Clock information
To check if the Sim-Clock can be stopped type: *#746025625# (= *#sim0clock#)
Nokia 8810
____________
Firmware version
*#0000# or *#8810#
IMEI Code
* # 06 #
Warranty Codes
*#92702689# (= *#war0anty#)
Just scroll down through the information. If entering the above code requires a
further warranty code try entering the following:
6232 (OK) : Month and year of manufacture
7332 (OK) : Last repair date
7832 (OK) : Purchase date (if previously set)
9268 (OK) : Serial number
37832 (OK) : Set purchase date (this can only be done once)
87267 (OK) : Confirm transfer
Enhanced Full Rate (EFR) and Half Rate Mode (HFR)
*3370# to activate Enhanced Full Rate - Makes calls sound better, but
decreases the battery life by about 5%.(I recommend this one)
#3370# to deactivate Enhanced Full Rate
*4720# to activate Half Rate Mode - Drops call quality, but increases battery
life by about 30%.
#4720# to deactivate Half Rate Mode
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2)Symbians S60 Mobile Codes ____________
Firmware version
*#0000# or *#3110#
IMEI Code
*# 06 #
Restores Factory Settings
*#7780#
Warranty Codes
*#92702689# (= *#war0anty#)
Just scroll down through the information. If entering the above code requires a
further warranty code try entering the following:
6232 (OK) : Month and year of manufacture
7332 (OK) : Last repair date
7832 (OK) : Purchase date (if previously set)
9268 (OK) : Serial number
37832 (OK) : Set purchase date (this can only be done once)
87267 (OK) : Confirm transfer
Nokia 5110
_____________
IMEI Number *#06#
For checking the IMEI (International Mobile Equipment Identity).
---------------------------------------------------------
Security Code 12345
Default security code is 12345. If you forgot your security code, there s so many program on the net which allowed you to know the security code likes Security ID Generator, Nokia IMEI Changer, etc.
update:
Security ID Generator (SID.EXE) and IMEI Generator (NOKIAIMEI.EXE) doesn t works with Nokia 5110
Resetting Security Code
If you accidentally lock the phone or forgot the security code, the best thing to do is check it with your local Nokia dealer. For advanced user, you can use WinTesla, PCLocals or LogoManager program to read the security code or resetting the code (You will need an FBUS/MBUS (or compatible) cable to do this.
---------------------------------------------------------
Software Version *#0000#
For checking the phones software (SW) - called firmware revision information.
e.q : Version V. 4.51 (26-03-98) will display
V 04.51
26-03-98
NSE-1
first line:
The Software Version (my guess is that this software has been used in previously Nokia-phones, what do you say?!).
second line:
The Date of the SW release.
third line:
NHE-8 has something to do with the type of phone you are dealing with. Is it GSM 900 (standard), GSM 1800 (DCS1800) or GSM 1900 (PCS1900)?
Nokia 2110, 3110, 8110(i) are all NHE types. The only thing that vary is the code after NHE- ("8").
NHE = GSM 900, NHK =GSM 1800 - The number in the end = the model (2110i = 4 etc.)
The 5110 and 6110 is called NSE-1 and NSE-3...this may be because it supports EFR (?)
update:
Newest Software Version was V5.22 (xx-xx-99)
V 05.22
01-07-99
NSE-1
If your software version is V4.00, upgrade your software version to latest version. V4.00 contains bugs that sometimes will show message,
"SIM Card Not Ready" even the card is already inside the phone.
---------------------------------------------------------
Software Update
The only thing to do (for you and me) is for us to go to the nearest Nokia dealer and make him do it for you. Just remember that it is supposed to be free (a receipt is required) so don t let him tell you anything else!
---------------------------------------------------------
SIM clock *#746025625# [*#sim0clock#]
to check if the Sim-Clock can be Stopped. This option is depen on your service provider network. (Sim-clock-stop is a kind of standby mode which will save battery time)
update:
This code doesn t work on phone with software version 4.59.
---------------------------------------------------------
Waranty Code *#92702689# [*#war0anty#]
Menu:
Displays Serial Number.
Displays the Month and Year of Manufacture (0698)
Displays (if there) the date where the phone was purchased (MMYY) you can here set the Purchasing Date
(Warning: You can only do this once - so be careful what you write)
Displays the date of the last repairment - if found (0000)
The next screen has Transfer User Data? (the same option as the 8110)
To exit turn the phone off and then back on.
---------------------------------------------------------
SP Lock The Service provider (SP) lock
Is used to lock the cell phone to the SP s SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it!
The cell phone will however accept another SIM card from the same operator.
All Nokia phones (2110 and newer) have four different SIM locks which can be used to lock the phone for up to 4 different providers. But most phones with restriction only have one lock activated. ( lock 1)
The main code used in Nokia phones is:
#pw+(master code)+Y#
This code is able to check, activate or remove Sim card restriction (SP-lock).
Use the * key to get the p, + and w chars.
Y has to be 1,2,3 or 4 - depending of what lock you what to deal with.
#pw+1234567890+1# for Provider-Lock status
#pw+1234567890+2# for Network-Lock status
#pw+1234567890+3# for Provider(???)-Lock status
#pw+1234567890+4# for SimCard-Lock status
(master code) is a 10 digit code, based on the phones IMEI number.
(I can NOT give you the master code SO DON T ASK ME FOR IT! )
Please click here to learn more about how to obtain mastercode and find out the lock status of your phone
eq. To remove restriction on lock 1 type following code:
#pw+(master code)+1#
If you just want to check your phone use 10 random numbers Eg. 1234567890 as the (master code)
eq. To check if phone if restricted on lock 1 type the following code:
#pw+1234567890+1#
Please NOTE that these codes could be used with care!
A user told me that it s only possible to type in about 3 different codes on each lock! Then something bad will happen ..therefore be careful!
---------------------------------------------------------
How can I check what locks have my phone closed?
There is 2 methods:
Use winlock to see the state of the locks, pressing Read Info.The Counter is the number of times that you have tried unlock your phone using an incorrect master code.
You can check it entering an imaginary mastercode on your phone but, it s not recommended because if you try enter a code 5 times your phone will not work anymore. By example, if you press at your phone #pw+1234567890+2# (note that # , p , w and + characters must be selected from * key) and your phone give you Code Error then your phone have lock 2 closed, if you get the message SIM Restriction Off your phone have lock 2 opened.
Look the table above to see how can check all locks:
Lock number Description Sequence to Check
1 Provider Lock #pw+1234567890+1#
2 Network-Lock #pw+1234567890+2#
3 Another Provider Lock #pw+1234567890+3#
4 SIM Card Lock #pw+1234567890+4#
---------------------------------------------------------
Unlock SP-Lock
Here is a way to Unlock your phone which is Service Provider locked, without to know SPLock code. With a Nokia 16xx/21xx/31xx/51xx/81xx that are SIMlocked to one privider you can bypass the SP lock like this:
First of all, PIN CODE MUST BE ON, then press:
C
C and hold until it clears display
* and hold until start to blink
* and hold until start to blink
04***your pin>#
Each time you turn your phone OFF it resets the lock, so this need to be done each time you ll turn your phone ON
The phone now says: PIN CODE CHANGED (or ACCEPTED)
and the SIM card is accepted until you restart the phone again.
NOTE: On vesion 5.04 Nokia has removed this option !
update:
There s another Nokia service provider lock generator for DOS (somehere on the net) called 5161un.zip (for Nokia 51xx-61xx models) This program uses the #pw+(master code)+1# code to unlock the phone. With this software you need to have a access to the EEPRom.. Sad
---------------------------------------------------------Bypass the SP-lock
With a Nokia 16xx/21xx/31xx/51xx/81xx that are SIM locked to one privider you can bypass the SP lock like this:
Insert sim card of diferent provider.
Turn on the phone and press the UP VOLUME key for 3 sec. then release it and the phone says PIN CODE ?
Press the "C" key.
Then Press * and wait until it desapear and apear again, then press * one more time and 04*PIN*PIN*PIN#
The phone now says: PIN CODE CHANGED (or ACCEPTED)
and the SIM card is accepted until you restart the phone again.
update:
On version 5.04 Nokia has removed this option !
---------------------------------------------------------
How to open lock 1 and 4?
You will need Winlock software and MBUS cable to do this. Winlock is a Nokia service program that you can use to open lock 1 and 4, really you are closing locks when you do that, but when you write ????? at MCC+MNC and MSIN text box, the phone don t understand it and consider that it s open.
That trick only works for lock 1 and 4, but not for lock 2 and 3. If you did not know your lock type, please read our miscellaneous tips page first. or read at above section in this page.
Install winlock 1.10
Connect your MBUS nokia data cable
Run Winlock
Push Read Phone, if you have Lock 2 or Lock 3 closed you can not open your phone, but you can try change Lock 2.
Select State Close in Lock 1 and Lock 4, fill out MCC+MNC and MSIN text boxes with ??????? and Push Close Locks.
Now you can use any operator card in your phone. If you get any error when you do that do the following steps:
Select State Automatic in Lock 1 and Lock 4 and change type to User in Lock 1 and Lock 4, fill out MCC+MNC and MSIN text boxes with ?????????? and Push Close Locks.
Select State Automatic in Lock 1 and Lock 4 and change type to Factory in Lock 1 and Lock 4, fill out MCC+MNC and MSIN text boxes with ?????????? and Push Close Locks.
If you continue getting errors you must turn off your phone and reset computer and try again.
---------------------------------------------------------
How to open lock 2?
When operators companies close lock2 you can only use the contract or prepaid card for this operator, but you can use another operator company prepaid card if you know what GID1 must write.
Install Winlock
Run Winlock
Configure Winlock. Select menu Winlock->Defaults and change GID byte count to 2.
Push Read Phone, and write down GID1 info that appear in lock 2.
Insert the prepaid card from a different operator company.
We must find out a the GID1 info adecuate for our new prepaid or contract card, take a look at our GID1 list and check if your operator and SIM card type is included, if not try to get a phone that have lock 2 closed and have the SIM card type that you want to use in your phone, and read GID1 info with winlock. You can try to write the most used GID1 codes like 0000,10FF,01FF, or FFFF, etc.
Change Lock 2 Type from User To Factory or from Factory to User.
Push Close Locks
Your phone will be reset every time you push Close Locks, if your card is not acepted the GID1 is not correct, repeat from step 4 until you find the correct GID1.
If you get error you must turn off your phone and reset computer and try again.
If you want your phone accept your original prepaid card write in GID1 the code you read at step 2 and close locks.
Exist a GID1 list?
In addition to the official way to open locks that Nokia service centers use with TDB4 or TDF-4(for WinTesla) security boxes, there is two secrets methods:
Opening the phone and adding a chip inside phone motherboard. But you will loose any warranty of your phone.
Using a special software with a MBUS Nokia cable. I don t have this software. Please don t bother me asking me about that. The only thing i know about that is that a friend is removing lock 2 using a special software. He don t make this for money, only for fun.
--------------------------------------------------------
Main Code #pw+(master code)+Y#
This code is able to check, activate or remove Sim card restriction (SP-lock).
Use the * key to get the p, + and w chars.
Y has to be 1,2,3 or 4 - depending of what lock you what to deal with.
#pw+1234567890+1# for Provider-Lock status
#pw+1234567890+2# for Network-Lock status
#pw+1234567890+3# for Provider(???)-Lock status
#pw+1234567890+4# for SimCard-Lock status
(master code) is a 10 digit code, based on the phones IMEI number.
update:
I get report that told me the code didn t works for Optimus Card
---------------------------------------------------------
Enhanced Full Rate Codec (EFR)
Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more)
*3370# and EFR will be activated after a reboot of the phone ( consumes more power )
#3370#
and EFR will be switched off after a reboot of the phone.
---------------------------------------------------------
Half Rate Codec (HR)
Half Rate will give you bad sound quality, which gives the service provider the opportunity to have more calls on the network; and you might get a lower charge from them. (Will give you 30% longer talk-time)
*4720# Half Rate coded will be activated after a reboot of the phone ( better standby time )
#4720# Half Rate coded will be de-activated after a reboot of the phone
---------------------------------------------------------
Unblocking Code
Unblock PIN1 : **05*PUK*newPIN1*newPIN1#@
UnBlock PIN2 : **052*PUK2*newPIN2*newPIN2#@
---------------------------------------------------------
Hiding your phone number
Dial 141 then the number you want to call eg. 141#######
This should stop your number been sent to the caller. (*)
(*) This only works on UK phones, if anybody has tried this and works, please let me know.
---------------------------------------------------------
Unlocking PIN2 for software version
V 05.07
20.11.98
NSE-1
If your SimCard is locked by your SP, you can check it and if it is, you will get the "wrong code" message on the display (for use 1234567890)
If your SimCard is locked by your SP, you can t unlock PIN2 !
---------------------------------------------------------
Blocking phone number at Cantel AT&T
If you have one of those cantel at&t phones if you press #0000# you can block your number
at no extra charge.
---------------------------------------------------------
New Menu on Emergency Calls *3001#12345#
Brings a new menu that gives you access to the emergency calls ( 911 Etc. ). It will give you FREE calls! (only the ones you put in the emergency!! )
This option will depend on your GSM operator
---------------------------------------------------------
Your number in your display
Goto menu 3-7 Call cost settings.
Turn ON the Call costs limit 3-7-1. PIN2 code Required.
Put in the limit with the phone number.
eg. my phone # is 019 2184697
Enter the limit as 2184697
Goto menu 3-7-2 Show costs in. PIN2 code Required.
Select Currency.
Enter Unit price : 1
Enter Currency name as 019 (per my phone # eg. above)
Now the phone number 019 2184697 will remains on the 4th row of the display.
Secondly, if you press the # key, it prompt which line to be used; Line 1 or 2.
---------------------------------------------------------
Free Call Tip
The tips needs Net Monitor enabled. Be aware that the trick will remove Netmonitor in some sw versions like v4.73 and v5.04.
Launch the Net Monitor in your Nokia 51xx / 61xx
Execute the test number 497
Free calling for about 90 sec should now have been activated.
---------------------------------------------------------
Nokia 5110 PIN-Out
Pin-Outs: Bottom view, keyboard up, counting from the left
V V 1 2 3 4 5 6 V
(o) | | [= = = = = =] | |
7 8 9 10 11 12
1 - VIN CHARGER INPUT VOLTAGE 8.4V 0.8A
2 - CHRG CTRL CHARGER CONTROL PWM 32Khz
3 - XMIC MIC INPUT 60mV - 1V
4 - SGND SIGNAL GROUND
5 - XEAR EAR OUTPUT 80mV - 1V
6 - MBUS 9600 B/S
7 - FBUS_RX 9.6 - 230.4 KB/S
8 - FBUS_TX 9.6 - 230.4 KB/S
9 - L_GND CHARGER / LOGIC GND
Nokia 61xx
__________
Firmware version
*#0000# or *#61x0#
IMEI Code
* # 06 #
Warranty Codes
*#92702689# (= *#war0anty#)
Just scroll down through the information. If entering the above code requires a
further warranty code try entering the following:
6232 (OK) : Month and year of manufacture
7332 (OK) : Last repair date
7832 (OK) : Purchase date (if previously set)
9268 (OK) : Serial number
37832 (OK) : Set purchase date (this can only be done once)
87267 (OK) : Confirm transfer
Enhanced Full Rate (EFR) and Half Rate Mode (HFR)
*3370# to activate Enhanced Full Rate - Makes calls sound better, but
decreases the battery life by about 5%.(I recommend this one)
#3370# to deactivate Enhanced Full Rate
*4720# to activate Half Rate Mode - Drops call quality, but increases battery
life by about 30%.
#4720# to deactivate Half Rate Mode
Nokia 81xx
_____________
Show IMEI code
* # 06 #
Software Version
* # 8110 #
This code shows you software version, date of manufacture and hardware number of your phone.
Warranty Codes
*#92702689# (= *#war0anty#)
Just scroll down through the information. If entering the above code requires a
further warranty code try entering the following:
6232 (OK) : Month and year of manufacture
7332 (OK) : Last repair date
7832 (OK) : Purchase date (if previously set)
9268 (OK) : Serial number
37832 (OK) : Set purchase date (this can only be done once)
87267 (OK) : Confirm transfer
Sim Clock information
To check if the Sim-Clock can be stopped type: *#746025625# (= *#sim0clock#)
Nokia 8810
____________
Firmware version
*#0000# or *#8810#
IMEI Code
* # 06 #
Warranty Codes
*#92702689# (= *#war0anty#)
Just scroll down through the information. If entering the above code requires a
further warranty code try entering the following:
6232 (OK) : Month and year of manufacture
7332 (OK) : Last repair date
7832 (OK) : Purchase date (if previously set)
9268 (OK) : Serial number
37832 (OK) : Set purchase date (this can only be done once)
87267 (OK) : Confirm transfer
Enhanced Full Rate (EFR) and Half Rate Mode (HFR)
*3370# to activate Enhanced Full Rate - Makes calls sound better, but
decreases the battery life by about 5%.(I recommend this one)
#3370# to deactivate Enhanced Full Rate
*4720# to activate Half Rate Mode - Drops call quality, but increases battery
life by about 30%.
#4720# to deactivate Half Rate Mode
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Taken From the Symbian Service Center Confidential Manual
1 : Save on battery and system memory being used by regulary checking the task manager which can be accessed by holding down the menu button!!
Tip 2 : Type *#0000# to view which firmware version you are running
Tip 4a: Set the screen saver to a short time out period to prolong battery life.Tip 4b: Avoid restarting the phone, or repeatedly turning it on and off. This helps increase battery life.
Tip 3 : If you would like to avoid being "blue jacked", keep bluetooth turned off, or set your phone's visibility to hidden.
Tip 4: Save memory when installing apps, by installing over bluetooth. This can be done using the nokia phone suite and a bluetooth serial connection. Only works with .SIS files, so java still has to be sent to the phone, but will save space when using .SIS files
Tip 5: Type *#06# to display your IMEI serial number, very valuable for the unlocking your phone to other sim cards
Tip 6: Shit happens, on a smartphone, its inevitable u do something wrong, and tis calls for a format of fone. to format the fone, press *#7370#, then enter the lock code, which is the sec code of the fone. NOTE: batt must b full, else if format is disrupted by low batt, consequences will b disatrous I heard the code *#7780# works too, pretty much the same i tink.for 6600 users, to format the fone, theres an alternative way. Press and hold <3>, <*> and Call (Send) buttons, then power on fone, keep holding on the 3 buttons, till u come to a format screen. this method ONLY works on 6600, and need not enter the sec code. BUT sec code would be reset to default 12345.
Tip 7: TO NGAGE USERS; Did u know u can install .sis files simply using the cable given? Juz plug it in, place the .sis file anywhere on e: (the mmc), not in any folders, root of e:, disconnect, then look for it in manager.
Tip 8: Don't want to carry a watch and a phone? Set the screen saver to show date and time, then you can ditch the watch.
Tip 9: Do u know how to use the edit button (abc or pencil button)?Heres how... in the inbox for example; u wanna delete multiple sms, simply hold the edit button, scroll down, and then, press c to delete the marked sms. The edit button can also b used to copy and past text in sms, simply hold it and scroll across, choose copy. pretty good for placing song names in ngages
Tip 10: Operator logosUse a filemanager like FExplorer or SeleQ to add the folders: "c:/system/Apps/phone/oplogo". Add a .bmp picture to folder "oplogo" and restart your phone! The .bmp picture size needs to be: 97 x 25 pixels
Tip 11: Check if the recepients phone is onDelivery reports
or
Type *0# your message in the message composer window space then write your message, the recipient will not see the star zero hash bit - just the message When they read it it will relay a message back to your fone showing the time they recieved it. (haven't yet tried it myself though)
Tip 12: A soft and Hard resetA Soft-reset - the process of resetting all the settings of the phone to the factory default! No applications are deleted! A Hard-reset is like formatting a drive! It does format the memory. Everything that has been installed after the first use of the phone is deleted! It will recover the memory of the phone to the state you purchased it! It is done by inputing the following code: *#7370# NOTE: The battery must be full or the charger has to be connected to the phone so that it does not run out of power and make the phone unusable.
Tip 13: While you are viewing a picture in your phone's gallery, press one of these shortcut keys (definitely works on 6600, not sure about other symbians)1 - turn image anticlockwise3 - turn image clockwise* - toggle on/off of full screen5 - zoom in0 - zoom out
Tip 14 : You can select all files in a folder by selecting THE folder and copy it then paste it somewhere. however u need to make a new directory. fexplorer wun let u copy that folder together. well seleQ can mark files to copy but it really takes time!
Tip 15 :: BlueJacking
First up, you need to know what Bluetooth is. There are lots of types of modern devices that incorporate Bluetooth as one of their many features. PDAs, mobile phones and laptops are a few of these modern devices. Bluetooth means that Bluetooth enabled devices can send things like phonebook/address book contacts, pictures & notes to other Bluetooth enabled devices wirelessly over a range of about 10 metres. So, we've got past the boring part. Now, using a phone with Bluetooth, you can create a phonebook contact and write a message, eg. 'Hello, you've been bluejacked', in the 'Name' field. Then you can search for other phones with Bluetooth and send that phonebook contact to them. On their phone, a message will popup saying "'Hello, you've been bluejacked' has just been received by Bluetooth" or something along those lines. For most 'victims' they will have no idea as to how the message appeared on their phone.
Tip 16: Formats of images
supported ones: JPG UPF GIF87a/89a WBMB MBM TIFF/F PNG EXIF
How to copy & paste text in your Nokia 3650:Press and hold the pencil key and select your text using the scroll key.Left function key will change to 'Copy'. Press it to copy the selected text to clipboard.You can paste the clipboard contents the same way:press and hold the pencil key and press 'Paste'. Or, press pencil key once and select 'Paste'.
Press and hold the Menu key to open the application switching window, where you can *duh* switch between applications.If a program hangs and you can't shut it down, select the application in theapplication switching window and press 'C' to kill it. It's also a faster way to exit programs.
Turn on/off the "click" sound made by the camera by selecting the 'Silent' profile or by turning warning tones on/off:Menu > Profiles > "select your activated profile" > Personalise > Warning tones > On/Off.(This also effects the sound of Java games and apps).
To change background image go to:Menu > Tools > Settings > Phone > Standby mode > Background image > Yes > "choose an image".The best size for background images is 174x132 pixels.
Only got blue, green and purple in your 3650 colour palette?This free app adds 3 more colours: Palette Extender.
Display an image when someone's calling:Menu > Contacts > "select a contact card" > Options > Edit > Options > Add thumbnail > "choose an image".
Add a personal ringing tone to a contact:Menu > Contacts > "select a contact card" > Options > Open > Options > Ringing tone > "choose a ringing tone".
Delete all messages from your Inbox at once:Menu > Messaging > Inbox > Options > Mark/Unmark > Mark all > Options > Delete.
Send or hide your caller ID: Go to: Menu > Tools > Settings > Call > Send MyCaller ID > 'Yes', 'No' or 'Set By Network' to follow the default settings of your home network.
If you often copy large files to your MultiMedia Card, I recommend a card reader.E.g. With a card reader it takes only 12 seconds to copy a 10 MB file!
Record the sound of a phone call using the (sound) Recorder.Menu > Extra's > Recorder > Options > Record sound clip.Note: short beeps are audible during call registration.But there is a 60 second limitation so if you want unlimited sound recording get this app: Extended Recorder.
While writing text, press "#" to switch between upper and lower case and Dictonary on/off (predictive text input).Press and hold "#" to switch between Alpha mode and Number mode.
Keyboard shortcuts for zooming and rotating images in Images:1 = zoom in, 0 = zoom out, press and hold to return to the normal view.2 = rotate anticlockwise, 9 = rotate clockwise, * = full screen.
In standby mode, press and hold the right soft key to activate voice dialling.To add a voice tag to a phone number, open a contact card and scroll to the phone number and select:Options > Add voice tag.
You can customize both soft keys located below the screen (in standby mode):Menu > Tools > Settings > Phone > Standby mode > Left/Right selection key > "select an application".
In standby mode. press scroll key center (joystick) to go directly to Contacts.
In standby mode, press and hold 0 to launch your wap home page.
In Menu or any subfolder, press numbers 1 - 9 to start the application at that location.123456789
In standby mode,45# + dials the number on your sim in memory slot 45.50# + dials slot 50 and so on.
If you have your keylock activated just press the on/off button to turn on your backlightto look at the time when it's dark without having to unlock the keypad.
Never, ever, in your whole life, install WildSkinz on your Nokia 3650!!! WildSkinz screws upthe whole 3650 system. It was never intended to work on the 3650, only on the 7650.
Why assigning Video Recorder in the right or left soft key does not work?
(Sound Recorder is launched instead of Video Recorder)It's a bug with firmware version 2.50.
How to check your firmware version:
A "Firmware" is the phone's operating system stored in internal Flash memory of the device (disk Z.Manufacturers release new firmware versions containing bug fixes, improvements and - sometimes - offering new functions.Firmware upgrade can only be made in authorized Nokia service centre (point).To check your current firmware version simply type *#0000# on main Phone screen.
?
How to check your IMEI (International Mobile Equipment Identity)?
Type *#06# on main Phone screen.
Start up in Safe Mode so no 'auto start' apps will be running:
To make sure that no memory-resident programs start when you reboot your phone,hold down the pencil key when you turn on the phone and hold it on untill you have to enter your PIN code.(When you have trouble booting up the phone with the MMC in it because it got corrupted for some reason, this trick willalmost always let you boot up the phone so you can remove the latest installed app which might have caused theproblem or if your phone is "unrepairable" you can still back up your important data before you do a format.)
Q: How to totally format your Nokia 3650 and remove all installed applications, user files and restore allsettings to default like it's new out of the box? (OEM apps won't be deleted like Camera and RealOne Player).
A: First Format your MMC: Menu > Extras > Memory > Options > Format mem. card > Yes.Note: It is very important to format your MMC before you format your phone!Then format your phone by typing *#7370# on main Phone screen.Phone will ask: "Restore all original phone settings? Phone will restart." Press 'Yes' and enter your Lock code (default is 12345).Tip: Formatting takes several minutes so you'd better connect your Nokia 3650to a charger to ensure that your battery doesn't get empty in the middle of formatting.Note: All your created acces points and mailboxes will be lost so take a note of them. And all application settings will be reset.E.g. In Camera, image quality is set back to normal and memory in use is set back to phone memory. And also in Messages,memory in use is set back to phone memory, etc. Also backup your contacts with PC Suite or a program like Contacts Manager.
To reset your wallet, should you forget your code,
Type in:*#7370925538#
this will reset the wallet code, the wallet contents will be deleted.
How to free more RAM on your phone
>>> Method 1: Flight mode:
Put your phone in "Flight mode" with Psiloc System Tools. Install System Tools, open it and select "Flight mode". This way you can restart the phone without your SIM card so there will be no running phone tasks in the background. Now you can have up to 3,5 MB of free RAM!
Note: ironically enough, Flight mode doesn't work when Smart Launcher is installed, at least in my case. But i've also heard several reports of people who have both apps running without any problems.
>>> Method 2: Smart Launcher trick:
Install Smart Launcher and open it. Go to Options, Settings and put Launcher ON.Now plug in your charger and switch off your phone. Wait untill the battery meter appears and short press the Menu button (don't hold).The menu should appear and now you can have 3,5 to 4,5 MB free RAM! (Hold Menu button to check RAM).
The trick is that with the charger plugged in, the phone must get a minimum software support for charging, even whenthe phone is switched off. And somehow Smart Launcher has still got it's shortcut running and that's the Menu button. So whenyou press the Menu button, you go directly to the Menu without any other phone tasks running in the background soyou trick the phone and you have more free RAM!Note: when you unplug the charger, the phone will switch off.
Method 3: Menu :
This method I found it by myself, it frees a little about 100~200 KB but I guess it's useful sometime
Close your menu not by selecting the right selection key "exit", or pressing the menu key another time, they only hide the menu app but do not close it, to close it select the left selection key "option" and scroll down and select "exit"
So when you open an app needs more ram reopen menu and close it, it's useful when play low bit rate video in realplayer paradise.
No comments:
Post a Comment